Climbing Wall Generator - TRIAL (Rhino 8 for Windows)

Free trial: feature-limited, no time limit.

Install: unzip this file, then drag
climbing-wall-generator-1.3.5-trial.3.yak onto Rhino 8, or use Rhino's
PackageManager and choose Install from file. Restart Rhino and open
Grasshopper; the components sit under the Climbing Wall tab, each
name carries a (Trial) suffix.

Included (5 components):
- 01 Wall Generator (Trial): wire a surface or polysurface into Srf.
  Two inputs are open: Srf and Seed (change the seed to reshuffle
  the feature layout). Every other setting runs locked: 6 bulge
  features at depth 2.6 and radius 3.5, bolt spacing 1.0, max 400
  bolts, thickness 0.06, min offset 0.15, hole cutters on. These are
  feet-scale values, matching the example.
- 02 Holds and Routes (Trial): bring your own hold library (blocks
  or plain geometry, flat on XY, facing +Z). Two sample holds are
  included in the sample_holds folder so you can set a route right
  away: a handle jug and a pocket, by Judah Chang (CC BY-SA, see
  LICENSE.txt). The STL files are in metres; if your document is in
  feet, tell Rhino the file units are metres when you import.
- Trial example: ClimbingWallGenerator_Trial_Example.gh, opened
  from the Climbing Wall menu (Open Example Definition). The demo
  wall is wired, the 2 sample holds are embedded, and the routes
  are already set.
- 03 Holed Wall (Trial)
- 04 Sections (Trial)
- 06 Bake All (Trial)

Not in the trial:
- 05 Panel Layout (the numbered cut layout and DXF export)
- The adjustable Wall Generator settings (the full version exposes
  21 inputs; the trial exposes Srf and Seed)
- The full starter hold library (15 holds) and the full example
  definition

Full version:
https://parametricarch.gumroad.com/l/climbing-wall-generator
Installing the full package replaces the trial automatically.
